HS SYSTEM
DUZTECH HS SYSTEM are a fixed system for reduction of dust particles. The flow rate is low and thereby the moisture content is kept low. Low floe rate is also of great importance if the availability of water is limited.
The water droplets are adapted for PM 2,5 - PM 10 particles.SPECIFICATIONS HS2 HS4 HS8 HS13
Water flow 2 LPM 4 LPM 8 LPM 13 LPM
Pump motor rating 0,55 kW 1,1 kW 1,5 kW 2,1 kW
Throw (up to) 5-15 m depending of installation angle
Power cable length 5 m
Specified voltage 230 VAC (220-240)
Frequency 50 Hz
Line connection L1-N-PE
Power connector size 2 pin + PE (Schucko) (type F)
Socket fuse 16 Amps
Control panel Start / Stop
MAN / AUTO
Water connection Thread 1” BSP (DN25)
Required in pressure 2 - 10 bar (min flow of 15 LPM)
Water quality Portable
Length , max 780 mm
Width 410 mm
Height 470 mm
Dry weight 60 kg
STANDARD EQUIPMENT
Booster pump 60-100 bar
Pump run dry protection
High speed nozzles 2 pcs
High pressure hose 2 x 5m
Nozzles adapted for PM 2,5 - PM10 particle size
Automatic (electric) water inlet valve (open at start, close at stop)
Manual water drain
Filter system 60 micron
Pressure gauges
OPTIONS
Additional nozzles
High pressure hose
Wireless remote control
Ultrasonic sensor detection
Filter with automatic cleaning
Heating
PUMP SYSTEM
NOZZLE
FILTER
WATER SUPPLY